I used ReclaiMe to restore deleted files from an accidentally factory-reset Buffalo Linkstation running Raid0. I'm happy to have the data back in my own hands.

I came across Reclaime and it has worked well with no issues. I accidently deleted files off my NAS and quickly started searching for a recommended software to do the recovery with. Wait until the ReclaiMe File Recovery starts to bring filesĪnd then check the quality of the recovery using the Preview.The volume will be under the BTRFS section for other NASes, look for it under the Linux md-raid Select the NAS volume you need to recover and click Start.Md-raid and LVM control structures if they are not too badly damaged. Use so called md-raid or LVM drivers to handle an array. Download and install ReclaiMe File Recovery software.Please, refer to this page if you need more information on why you should extract the disks from the NAS when recovering data. If Windows on the PC to which you connect the disks asks you to 'Initialize disks' or even 'Format' them, don't. These labels will help you to put itĪll back together in the same way if needed. When you take the disks out of the NAS, label all of them according to which bay they belong to. Don't forget to turn off the power and pull the plug out of the wall socket when disconnectingĪnd connecting the disks.

Get the disks out of the NAS and connect them to the PC.You can first try recovering data directly from a working NAS device in read-only mode, as described here. If your NAS device is functioning normally and all you need is to recover a couple of deleted files, Below are the instructions for a full-scale NAS data recovery which requires turning off the device, removing the drives from it, and connecting them to the PC directly.

Reclaime pro 928